LG125 glove box (purification and regeneration system)
It is a standard glove box, equipped with purification system and regeneration system as standard,
You can choose to install a freezer (up to -40 degrees C). Static eliminator, UV bulb or Spin Coater or Cold Trap.
It can also be used with a vapor deposition machine, or according to customer needs, a custom-made transfer box, and equipped with a two-stage high-vacuum pump for use,
[the glove box body]
(1) Outer dimensions of the glove box: 1250L X 840D X 920Hmm, bottom frame with wheels and height adjustment feet
(2) Glove box body material: stainless steel SUS304, thickness: 3mm, polished sand surface inside the glove box, powder paint treatment on the outside
(3) Glove box working gas: nitrogen, argon, helium inert gas environment
(4) Storage shelf: stainless steel SUS304, thickness: 1.5mm, two (900L X 200Dmm)
(5) Lighting: one external fluorescent lamp 30W*2
(6) Glove box window: transparent Lexan window, thickness: 10mm
(7) Glove fixing ring: white Polyformaldehyde material, Size: 220mm diameter, O-ring sealed
(8) Gloves: Butyl material, thickness 0.4mm, number of gloves: 1 pair
(9) Glove box leakage rate: <0.05Vol%/h
[Electronic control system]
(1) Power supply: 220V/60Hz, 10A, a set of AC110V power socket is attached inside the glove box
(2) System control: PLC programmable controller with 5.7-inch Chinese and English touch human-machine interface to control and display water oxygen concentration and glove box pressure value
(3) The pressure of the glove box can be set freely, automatic constant pressure (0-16mbar) control and foot pressurization/decompression switch control glove box pressure
[Gas purification/regeneration system and gas pipeline]
(1) Purification system: gas closed loop cycle water removal and oxygen removal system
(2) Concentration of glove box gas after treatment by purification system: H2O<1ppm(v), O2<1ppm(v)
(3) Purifier (including catalyst): made of stainless steel SUS 304, including heater and heat preservation, which can be used repeatedly
(4) Regeneration control: automatic program control by PLC man-machine interface (automatic/manual regeneration control mode), the date of purifier regeneration is recorded
Memory function, can be displayed on the man-machine screen
(5) Regeneration gas: nitrogen-hydrogen mixture N2/H2 mixture (H2: 3-5%) or nitrogen-argon mixture Ar/H2 mixture (H2: 3-5%)
(6) Cooling system: Cooling water flow rate 2-3 l/min (the buyer of the ice water machine prepares it himself)
(7) Purification system circulation windmill: gas circulation flow rate 70 m3/h at P=60 mbar
(8) Purification system valve parts: controlled by KF-40 pneumatic valve for vacuum
(9) Control valve: Solenoid valve 3/8", PLC control
(10) Purification system pipeline: stainless steel SUS304 piping, Type KF-40 vacuum joint system
(11) Air supply piping: stainless steel 3/8" piping
(12) Leakage rate of purification circulation system: <10-5 mbar-l/s (Purifier Unit And Components)
[Gas Filtration System]
Micro-dust filtration system in the glove box: round HEPA FILTER (0.3μm) circulates and filters the micro-dust gas inside the glove box
[SOLVENT TRAP]
Organic adsorber: 10KG activated carbon adsorbent, three manual switching valves KF-40 and pipeline manual switching valves and vacuum and pressure balance valves
[Vacuum pump]
Vacuum pump: displacement 12m3/h, two-stage oil rotary vacuum pump, vacuum degree <3 x 10-3 mbar, after the vacuum pump stops running, it has
With backstop function (EDWARDS RV-12)
[Feedthroughs hole]
Feedthroughs holes on the rear side of the glove box: 5, KF- 40
[pass box]
(1) Large transfer box: stainless steel SUS304, thickness 2mm cylindrical transfer box diameter = 390mm, length = 600mm
Internal polishing treatment, external powder paint, hard anodized aluminum door cover, 10mm thick, internal sliding table
1 oil-filled vacuum gauge, 1 vacuum valve: KF-25 pneumatic valve, 1 pressure balance valve 3/8" solenoid valve
Large transfer box control: the inner and outer doors are manually operated, and the vacuum/pressure balance is automatically controlled by PLC
(2) Small transfer box: stainless steel SUS 304, thickness 2mm, cylindrical transfer box diameter=150mm, length=300mm
1 oil-filled vacuum gauge, 3/8" vacuum/pressure balance is manual control
(3) Leakage rate of transfer box: <10-5 mbar-l/s
[Water oxygen detector]
(1) Trace humidity analyzer: 0-1000PPM(V)
(2) Micro oxygen analyzer: 0-1000PPM(V)
[GLOVE BOX AUTOMATIC PURGING SYSTEM]
(1) The glove box PURGING system can freely set the water oxygen concentration value, and the concentration detection will automatically start the PURGING glove box
(2) After the glove box is released from the atmosphere, the Purge system must be able to automatically and quickly drop the Purge to below 100ppm water oxygen concentration within 60 minutes
Competitive Price:
Place of Origin: New Taipei, Taiwan
Sales Method: Export, Manufacture, Wholesale
Payment Term: T/T, L/C
